BALANCING ACCESSORIES
C D International is proud to offer a
number of accessories
as well as trial weights
to make your balancing
job easier. There
are a number of items such as our Balancing Wax
and Glass Bead Reflective Tape
as well as Balancing Machine Drive Belts.
For balancing and alignment tools,
please visit our
Balancing Accessory Tools Page. If a product you need is not listed on
our site, please contact us
and we would be happy to source it for you.
|
|
|
Balancing Machine Drive Belts
|
The flex proof, seamless joining system creates a belt that is free of thickening and hardening. This has a
favorable
effect on the running behavior of the belt and reduces noise levels. C D
International balancing machine belts are designed for low noise, high efficiency
and energy saving power transmission independent of pulley diameter.
|
To order, simply provide us with the belt length (circumference) and width
in inches.
Please allow up to two weeks for shipment.
|
 |
|
Belt Width
|
Price per Inch (Length)
|
| Up to 1 inch |
$0.70 / inch |
| Up to 2 inches |
$1.05 / inch |
| Up to 3 inches |
$1.40 / inch |
|
|
|
Adhesive Backed Lead Balance Weights for Sheaves
|
These adhesive balancing weights
come in strips of blocks that can be broken apart to achieve the
final correction weight.
Each block is stamped with its weight. Sheaves
should be balanced
to compensate for the sloppy run out tolerances allowed by most
manufactures.
In some cases an inaccessible fan
can be balanced on the sheave.
|
 |
|
Part # |
Description |
Price |
AW-60
|
One strip of 4 x 10 gram blocks interspersed with 4 x 5 gram blocks,
totaling 60 grams |
10.00 |
AW-84
|
One strip 7 gram blocks totaling 84 grams |
10.00 |
AW-84T
|
One strip of 12 x 7 gram thin blocks totaling 84 grams. For
tighter radius. |
10.00 |
AW-168
|
One strip of 12 x 14 gram blocks totaling 168 grams. |
10.00 |
|
