C
D International, Inc.
Your Balancing Correction Weight Specialist
PRODUCTS:
Fan Balancing C-Clamps
Steel Balancing C-Clampsare used as permanent correction weights
on vane axial flow fans and squirrel cage fans. They have a
serrated surface opposite the set screws that provides additional
holding power. We offerDouble Sided
Set Screw Steel Balancing C-Clamps
for harsh environments where additional
stability is required. Stainless Steel
Balancing C-Clamps are used in a few applications such as
food and drug handling where non-reactivity is a priority. Protanium
Balldriver L-Wrenchesthat withstand high torque and wear
are recommended for use with SC-Clamps.
Steel Balancing C-Clamp Kit
*Steel
Balancing C-Clamps may be purchased as a pre-packaged set, SC-KIT, (includes
all four wrenches required for installing the C-clamp correction weights, also
sold separately)
Part #
Description
Price
SC-KIT
28 pieces ie. 2 of each
clamp size from .04 oz. to 8.0 oz.
Double Sided Set Screw
C-Clamps These severe-duty balancing correction weight C-clamps
are designed for harsher
environments or high surface speed. They have set screws on both
jaws making them ideal for use in these situations or
where fan blades may be corroded or other wise difficult to secure a weight to.
The set screws on one side of the C-clamp are tightened until the fan blade is
locked in between the set screw points and the serrated surface on the other
side of the clamp. The second set of screws on the other jaw are then
tightened to further secure the fan
balancing weight.
Part #
Throat Size
Description
Price
DSS-SC-2
5/8"
1 x 2.0 ounce
10.95
DSS-SC-3
5/8"
1 x 3.0 ounce
10.95
DSS-SC-4
5/8"
1 x 4.0 ounce
10.95
DSS-SC-5
3/4"
1 x 5.0 ounce
11.95
DSS-SC-6
3/4"
1 x 6.0 ounce
11.95
DSS-SC-7
3/4"
1 x 7.0 ounce
11.95
DSS-SC-8
3/4"
1 x 8.0 ounce
11.95
Stainless Steel Balancing C-Clamps
The Stainless Steel C-Clamps
are made from 303 stainless steel and are used as permanent
correction weights on vane axial fans and squirrel cage fans.
Part #
Throat Size
Description
Price
STSC-125
3/16"
1 x .125 ounce
14.00
STSC-25
5/16"
1 x .25 ounce
14.00
STSC-50
5/16"
1 x .50 ounce
14.00
STSC-75
5/16"
1 x .75 ounce
14.00
STSC-1
5/16"
1 x 1.0 ounce
14.00
STSC-2
5/8"
1 x 2.0 ounce
16.00
STSC-3
5/8"
1 x 3.0 ounce
16.00
STSC-4
5/8"
1 x 4.0 ounce
16.00
STSC-5
3/4"
1 x 5.0 ounce
18.00
STSC-6
3/4"
1 x 6.0 ounce
18.00
STSC-8
3/4"
1 x 8.0 ounce
18.00
Protanium Balldriver L-Wrenches
for Use with Balancing SC-Clamps
These wrenches are made from Protanium to withstand high torque
and wear. The full set
(Part # HW-BDS) contains all eight sizes. The four
sizes required to tighten all of the balancing correction C-clamps
are included in the SC-KIT
and are also sold individually.
C
D International, Inc.
